inquirylist

The profile of the JUBU Swan Neck carbon rear wing (sport) is based on the already pretty effective design of the Lotus Evora GT430 OEM wing. Our engineers slightly adapted the wing design based on our simulations and test data to perfectly fit the Emira (aerodynamic-wise and aesthetic-wise) and also work perfect with the JUBU swan-neck uprights.

For a precise adjustment of the aero-balance, the angle of attack can be adapted on the bracket in five steps (1 x JUBU basic setup, 2 x steeper, 2 x flatter). You can easily set the wing to generate more or less downforce on the rear axle to perfectly fit your application, car setup or driving style.

Besides the functional aspects (increased downforce, improved aero-balance, robust constrution and optimized transfer of the applied forces in the car), we also led a focus on aesthetics while designing the wing and its swan neck uprights. Compared to the Lotus OEM swan neck wing of the Emira GT4, we've chosen a more elegant and visual lighter design.

Because of the special positioning of the uprights on the car (mounting point under a OEM-cover), it is not necessary to drill or cut visible holes in the outer body of the car. If you want to unmount the wing later on, you just have to cover the holes with the OEM cover on the outside. This means there is no paintjob oder bodywork on the outer car body necessary when you want to uninstall the wing.

Benefits

• Sporty, elegant and very Emira-specific design (design of blade, visible carbon fibre, elegant swan-neck uprights)
• Optimized airflow/effectiveness due to the swan-neck design of the JUBU uprights
• Increased downforce on the rear axle, precisely adjustible setup (5-step) for an optimized aero-balance
• Ultra-lightweight (full carbon, milled aluminium)
• Easy to install, no visible marks (no visible holes, etc.) on the outer bodywork when uninstalled (only visible from the inner side of the trunk, outer side can be covered with the oem cover)

Details

• All bolts at the wing and all fixing bolts are made from titanium (black anodized)
• Ultra-lightweight rear wing (visible carbon wing & endplates, lightweight aluminium brackets & uprights)
• Glossy finish (UV-resistant coating)
• Full set incl. all mounting material (Plug & Play, retrofittable without leaving marks on visible areas of outer bodywork)
• Designed by using state-of-the-art CAD und simulation software, extensively tested on roads and tracks all around Europe
• Developed by JUBU Performance, handmade in Austria

Fits for

• Emira V6
• Emira I4

Scope of delivery

• 1 pc. ultra-lightweight rear wing (visible carbon fibre)
• 2 pcs. end plates for rear wing (visible carbon fibre)
• 2 pcs. swan-neck uprights (CNC-milled, high-strength aluminium, anodized black)
• 2 pcs. mounting brackets (for installation on car)
• 2. pcs. 5-step adjustible wing brackets (CNC-milled, high-strength, anodized black)
• All bolts at the wing and all fixing bolts are made from titanium (black anodized)
• Drill and cutting templets
• 1 pc. installation manual

Note: The Carbon wing and endplates are handmade, the carbon structure may slightly vary to the wing displayed on the pictures.

Note: The JUBU Swan Neck carbon rear wing (sport) is part of the JUBU Emira Aero-Kit. It works fine as stand-alone application, but its overall-performance can be improved again by using it combined with the JUBU Carbon front splitter and the JUBU diffusor fin-extensions for Emira.

If you have any questions concerning the product or how to order, just contact us via phone or Email.